Eco-eye Smart PV is a complete monitoring system for your solar installation and displays real- time information on the power being consumed as well as the power you are generating. It is easy to install - and does not require the use of a junction box (Henley block) - as is the case when using Eco-eye Elite or Mini. It offers computer connectivity if you wish to download data for further analysis.

Eco-eye Smart PV

With three sensors simply clipping on both the generated and demand cables, Smart PV shows

	the power you are generating,
	the power you are using , and,
	net power - all on one clear display

Using the on-board traffic light system, Smart PV shows you instantly when you have a surplus (or are using power from the grid). You can also set your own Daily Usage Target which is displayed as a graph on–screen and serves as a constant visual reminder of how much power you are using. Smart PV also stores daily usage readings in kW for 64 days so you can track your usage over this duration even if you don’t have access to a computer.

The USB real-time output allows you to send data via a cable to your computer for further analysis whilst Smart PV can also log generated and demand to a memory card at 4 second intervals. This information can then be downloaded to your computer and analysed as required.

For further information please read:

	Smart PV Set Up Instructions leaflet
	Smart PV Brochure
	Full Smart PV instructions (PDF)

Monitor Generated Power

For simple monitoring of generated power an Elite or Mini can be attached to the live cable after the inverter.

	Eco-eye Elite
	Eco-eye Mini

Monitor Power Being Used

Monitoring demand requires access to a cable that will only ever have power going to the house so the solar system must be wired to a junction box or Henley Block. The demand monitoring Eco-eye needs to be connected to the cable from the Henley block to the consumer unit (fuse box)

	Eco-eye Elite
	Eco-eye Mini

2 Eco-eyes can be used, 1 on generate and 1 on demand